Open Channel Flow Meters
AVFM 4.0 Area Velocity Flow Meter
The AVFM Area-Velocity Flow Meter measures both Head and Velocity to calculate flow volume in an open channel or pipe. Calibration is simple: enter the pipe ID or channel width and the AVFM automatically computes flow volume and displays the flow rate.
The AVFM sensor mounts inside the pipe or at the bottom of a rectangular channel. No special compounds, tools or hardware are required. The sensor is a completely sealed ultrasonic unit with orifices or ports.
Monitor flow through open channels, partially full sewer pipes and surcharged pipes a flume or weir. Ideal for municipal storm water, combined effluent, raw sewage and irrigation water.
Uses a submerged ultrasonic sensor to continuously measure both Velocity and Level in the channel. The sensor is resistant to fouling and corrosion. It is tolerant of turbulence and high approach velocity. Can be configured with the standard submerged velocity level sensor, or with submerged velocity plus a separate non contacting ultrasonic level sensor.
Product Specification
The AVFM Area-Velocity Flow Meter measures both Head and Velocity to calculate flow volume in an open channel or pipe. Calibration is simple: enter the pipe ID or channel width and the AVFM automatically computes flow volume and displays the flow rate.
The AVFM sensor mounts inside the pipe or at the bottom of a rectangular channel. No special compounds, tools or hardware are required. The sensor is a completely sealed ultrasonic unit with orifices or ports.
Monitor flow through open channels, partially full sewer pipes and surcharged pipes a flume or weir. Ideal for municipal storm water, combined effluent, raw sewage and irrigation water.
Uses a submerged ultrasonic sensor to continuously measure both Velocity and Level in the channel. The sensor is resistant to fouling and corrosion. It is tolerant of turbulence and high approach velocity. Can be configured with the standard submerged velocity level sensor, or with submerged velocity plus a separate non contacting ultrasonic level sensor.
Product Specification
OCF-IV Open Channel Flow Meter
The OCF-IV uses a non-contacting ultrasonic sensor mounted over a flume or weir to measure flow. It is accurate, reliable and verifiable.The separate, watertight electronics/display enclosure is mounted at a convenient location within 500 ft (150 m) of the sensor.
Use the built-in keypad for fast, easy calibration with menu selection of flume or weir and measurement units (e.g. gallons, litres etc.) Calibration values and data logs are passwordprotected and retained during power interruptions. Use the OCF-IV to display flow reports of daily minimum, maximum average and total flow, or to transfer data logs to a PC computer.
The OCF-IV continuously displays, totalizes, transmits and data logs open channel flow.
Product Specification
Use the built-in keypad for fast, easy calibration with menu selection of flume or weir and measurement units (e.g. gallons, litres etc.) Calibration values and data logs are passwordprotected and retained during power interruptions. Use the OCF-IV to display flow reports of daily minimum, maximum average and total flow, or to transfer data logs to a PC computer.
The OCF-IV continuously displays, totalizes, transmits and data logs open channel flow.
- Simple 3-key Calibration
- Password Protected
- 50,000 point Data Logger
- RS232 Serial Output
- 4-20mA Output
- 10-Digit Totalizer
- Windows Software
- Non-Contacting Sensor
- Simple Keypad Operating System
- Easy to Install and Calibrate
- Simple, Accurate and Reliable
Product Specification
SLT32 For level, pump control and open channel flow
Specify SLT32 for inventory monitoring and level control of chemicals, wastewater, viscous or corrosive liquids. Built-in control relays are programmable for pump control, pump alternation and level alarms.
Displays, transmits and totalizes wastewater flow through any flume or weir. Features a simple, password protected calibration system, automatic totalizer and flow proportionate control relays. Each SLT32 includes a non-contacting ultrasonic sensor which mounts above the material being measured. There is no contact and no moving parts.The sensor is sealed to withstand accidental submersion and rated for hazardous locations with optional intrinsic safety barrier.
Product Specification
Displays, transmits and totalizes wastewater flow through any flume or weir. Features a simple, password protected calibration system, automatic totalizer and flow proportionate control relays. Each SLT32 includes a non-contacting ultrasonic sensor which mounts above the material being measured. There is no contact and no moving parts.The sensor is sealed to withstand accidental submersion and rated for hazardous locations with optional intrinsic safety barrier.
- For Chemical Tank Level
- Sumps and Pump Stations
- Flow through Flumes andWeirs
- Use it for Level
- Use it for Flow
- No maintenance Sensor
Product Specification
